Many customers will encounter the problem of blue screen when using the industrial PC.Today,Senke will briefly analyze the main factors and solutions of the blue screen of the industrial pc.
1. Dust accumulation causes blue screen of industrial PC
Although the industrial PC is fully encolsed and fanless design, it has been operating in dusty industrial environments for a long time, the dust will also accumulate, and affecting hard disk access. This is a common reason for industrial computer bule screen. Therefore, it is very necessary to clean up the dust after the industrial computer has been running for a period of time. The accumulation of dust will cause poor heat dissipation. Similarly, if the original parts inside the machine have been aged for too long, it will also cause the blue screen. Usually the fan is a common accessory that is prone to aging and problems. It is enough to lubricate it regularly, or replace the fan to solve such problems. For other accessories, you can evaluate the condition by touching temperature, if it is hot, then the accessory may be damaged. You should replace it with a new one to see if the problem is solved.
2. Memory issues causes blue screen of industrial PC
The memory resources of the industrial computer conflict, the memory is too small to load the program, and run slower, which will also cause the blue screen. Therefore, the best way is to try not to let multiple programs run at the same time, and just install some commonly used software. At the same time, loose or damp memory sticks can also cause problems. Try replacing the memory stick, if everything works fine after the replacement, it is the memory stick itself.
Hardware incompatibility or Insufficient power supply will also causes blue screen of industrial PC. Although there are many reasons for the blue screen, the reasons are always inseparable from both hardware and software.