In this hot weather, how to control the temperature of outdoor LED is particularly important.
As we all know, the suitable temperature for outdoor LEDs is -20°~65°. Excessive temperature will affect the chip, and the luminous efficiency of the display will decrease, resulting in obvious light decay. In addition, the packaging material of the lamp tube will also cause the thermal expansion coefficient to rise suddenly due to the high temperature, which will lead to the open circuit and failure of the LED lamp tube.
So in high temperature, how to dissipate heat from outdoor LED display?
1. When the area of the outdoor LED display is less than 20 square meters, two small fans can be used for heat dissipation. The specific number and size can be adjusted according to the site space.
2. When the area is greater than 20 square meters, if the installation position of the LED display is against the wall, the exhaust fan can be installed above the side of the screen and arranged in sequence. When installing the exhaust fan, a mesh structure should be selected to prevent personal injury caused by wind adsorption.
In the case of a column-type LED display, you can choose to install the exhaust fan behind the large screen near the top, or you can make the exhaust fan in the form of a louver, which can be waterproof while dissipating heat.
If you are in red high-temperature areas such as Chongqing, Sichuan, Hubei, etc., you can choose to install exhaust fans and air conditioners at the same time. When the temperature exceeds 40°, choose the air conditioner to dissipate heat; when the temperature is lower than 40°, you can turn off the air conditioner and choose the exhaust fan to dissipate heat. .
In daily life, the application of LED display is very extensive. When paying attention to outdoor LED display, the temperature of indoor LED display should also be monitored. Appropriate temperature can not only ensure the normal operation of LED display and reduce damage, but also prolong the life of LED display. service life.